Amir Hossein Baghaie
Abstract
Reducing the entry of heavy metals into the food chain in plant cultivated in the areas contaminated with heavy compounds or petroleum compounds is one of the main environmental issues. This research was conducted to evaluate the role of co-inoculation of wheat with piriformospora indica and pseudomonas ...
Read More
Reducing the entry of heavy metals into the food chain in plant cultivated in the areas contaminated with heavy compounds or petroleum compounds is one of the main environmental issues. This research was conducted to evaluate the role of co-inoculation of wheat with piriformospora indica and pseudomonas putida on plant Cd concentration which has been planted in the Cd and petroleum hydrocarbon -polluted soil and treated with Zn oxide nanoparticles and agricultural steel slag. Treatments consisted of Cd-polluted soil (0, 10 and 20 mg kg-1 soil) that was amended with 0 and 2 % (W/W) Zn oxide nanoparticles and agricultural steel slag and the wheat plant that was co-inoculated with P.indica and P.putida that which was cultivated in a soil that was naturally polluted with petroleum hydrocarbon. After 90 days, plants were harvested and the Cd concentration was measured using atomic absorption spectroscopy. In addition the degradation rate of petroleum hydrocarbon in the soil was determined. Plant co-inoculation with P.indica and P.putida significantly decreased and increased the plant Cd concentration and degradation rate of petroleum hydrocarbon in the soil by 13.1 and 14.9%, respectively. In addition, using 2 % (W/W) Zn oxide nanoparticles and agricultural steel slag significantly decresed the plant Cd concentration by 18.2 and 15.4%, respectively. It can be concluded that plant co-inoculation with P.indica and P.putida had additive effect on degradation of petroleum hydrocarbon in the soil that was amended with Zn oxide nanoparticles and agricultural steel slag.
Shahryar Jafarinejad
Abstract
Large quantities of oily wastewaters can be generated from the activities and processes in the petroleum industry which draining of these effluents not only pollutes the environment but also reduces the yield of oil and water. Therefore, development of treatment processes for petroleum industry wastewaters ...
Read More
Large quantities of oily wastewaters can be generated from the activities and processes in the petroleum industry which draining of these effluents not only pollutes the environment but also reduces the yield of oil and water. Therefore, development of treatment processes for petroleum industry wastewaters is vital in order to prevent serious environmental damage and provide a source of water for beneficial use. Reverse osmosis (RO) can be the most common membrane process used for desalination from oily wastewater and can produce water suitable for reuse at the petroleum industry. In this study, the application of RO technology for the petroleum industry wastewater treatment in different laboratory, pilot, field, and industrial scales have been reviewed. In addition, membrane fouling control, performance efficiency, treatment system configurations, pretreatment methods, quality of treated water, and economic issues have been investigated. With mixtures as complex as petroleum industry wastewaters, membrane fouling becomes a significant hurdle to implement the RO-based purification system. Operating the system within the critical flux range or adding chemicals, and/or pretreatment can usually control membrane fouling. Salt rejection of RO membranes can be 99% or higher.